Concrete powder waterproof additive is a mixture with very fine particles insoluble in water, which spreads throughout its entire volume after mixing with concrete.
Due to the hydrophobicity of concrete powder waterproofing, the penetration of water, chemicals and sulfates is prevented, the durability of concrete increases against different atmospheric conditions.
For free advice on waterproofing and all concrete additive products, call Mr. Jahdi at 09152373401
Call.
Advantages of using waterproof:
Powder waterproofing reduces the permeability of concrete against water and corrosive chemical solutions by up to 80%.
Powder waterproofing is one of the advantages of using waterproofing, increasing the consistency and uniformity of concrete and increasing the speed of concrete setting by up to 10%, reducing the effects of corrosion, water leakage, and increasing the protection of rebars and reinforced structures.
Concrete powder waterproofing increases the life of concrete structures.
The low cost of materials and ease of implementation are two other advantages of waterproofing. For the production of all kinds of concrete, tanks, foundations, bridges, walls, roofs, etc. Chemical concrete powder waterproof is the best.
Waterproof applications:
In dam construction and air and ground resources made of concrete, pools, concrete structures that need to be sealed. In places where freezing and thawing conditions prevail. It is used to make concrete impervious to chemical solutions and water for retaining walls, water channels, tunnels, bridges, ponds and for durable and long-term waterproof constructions.
The important point of waterproofing:
The most important reason for the lack of resistance of concrete against water penetration and other chemical factors is the lack of necessary compression and the presence of voids in concrete. After mixing with concrete, chemical concrete powder concrete creates a hydrophobic crust (water-repellent) inside the pores, cavities and on the surface of the concrete, after mixing with the concrete, and it cuts off the connection of the fine channels inside the concrete with each other. It reduces its permeability.
The resulting layer has a stable property and besides the water repellency property, it increases the resistance of concrete against the invasion of sulfates and other chemical solutions.
Chemical concrete powder waterproof protects your structure against moisture. Although waterproofing systems make up a small part of the total cost of a building project, if the wrong solution is chosen or installed incorrectly, the cost of remediation can be very high.
Usually, the amount of water used in concrete is much more than the amount needed to hydrate cement. This excess water occupies space in the concrete and forms a network of capillary pores.
Amount of waterproof powder consumption:
The best amount of consumption is determined by performing various tests in workshop conditions. The usual amount of consumption is 1 to 3% of the weight of cement used. Which is 3% at best.
How to use waterproof powder:
It is better to mix it with the solid materials of the mortar first and then add the used water, otherwise it should be mixed for at least 10 minutes after adding it to the ready concrete.
(Due to the possible error of adding additives and the use of invalid additives in the concrete mix, it is not prepared to add all the additives on site.)
White color
Ion Keller: No
Specific weight: 1.34 gr/cm
pH: 7
Physical state: powdery and insoluble in water
Packaging: In 25 kg bags, this product can be used with all kinds of lubricants, concrete antifreeze and concrete glue.
Store at a temperature between +5 and +35 degrees Celsius, away from direct sunlight and humidity.
Waterproof storage period
It can be stored in the original and unopened packaging for one year or more.
From the properties and effects of waterproof
• Complete blockage of all fine defects caused by the filter deficit of aggregates
• Transferring the hydrophobicity of filler to concrete
• Removing water absorption and permeability of concrete
• Without affecting the compressive strength of concrete
• Maintaining the sealing properties during the operation of the structures
• Prevent sulfate attack and alkalization
• Preventing the penetration of chlorine ions and other corrosive chemicals into the concrete
• Very high spreadability and ease of mixing with concrete
• Placement in empty spaces and capillary pores
Download the waterproof powder concrete catalog bs950
Gold chemical concrete has
American ASTM standard with code (AS00T00220910M04)
and TUWCERT BS EN 934-6:2019 certificate with code (90213206)
TUWCERT ISO 900:2015 certificate with code (90213205)
ISO 14001:2015 certificate with code (211002406)
ISO 10004:2018 certificate with code (211002405)
ISO 10002:2018 certificate with code (211002404)
TOCT31357-2007 standard with code (3131120210620013)
The standard is TOCT P 56378-2015 with the code (3131120210620014).
