Bolt planting glue is a chemical substance used to connect bolts, rebars and anchor bolts to concrete, stone and other materials. This adhesive consists of epoxy, polyester and vinyl ester resins along with other additives. Bolt planting glue is available in two-part and one-part forms.
Compressive strength: 40-60 MPa
Tensile strength: 10-15 MPa
Initial capture time: 30 minutes
Full curing time: 24 hours
Operating temperature: 5 to 35 degrees Celsius
Expiry date: 12 months
High resistance: bolt planting glue has more compressive and tensile strength and can withstand heavy loads.
Strong adhesion: This adhesive completely adheres to concrete, stone and materials and prevents the creation of seams and cracks.
Chemical resistance: Bolt planting adhesive is resistant to acids, bases, chemicals and other chemicals.
Water and moisture resistance: This adhesive is water and moisture resistant and can be used in moisture proof environments after application.
Easy: Planting glue can be applied easily and quickly.
Non-shrinkage: This glue does not shrink or shrink after drying.
Environmentally friendly: Bolt planting glue does not contain harmful and toxic substances and does not harm the environment.
Rebar and bolt anchor planting in concrete or stone
Installation and repair of metal, concrete and stone parts
Repair of concrete structures, bridges and roads
Installing and fixing the rail of cranes
Installation of railway tracks
Suitable for planting rebar in concrete floor
Installation of bridge column plate
Suggested reading: To learn more about Introduction of concrete industry technologies And Concrete and cement producing companies click.
Clean and dry the desired surface.
Drill the hole with the right diameter and depth.
Clean the hole from dust.
Mix the resin, hardener and powder in the specified ratio.
Pour the mixture quickly into the hole.
Insert the bolt, rebar or bolt anchor into the hole while it is wet.
Keep the installation place fixed until the glue is completely dry.
Epoxy resin
Hardner
Quartz powder
High compressive and tensile strength
Excellent adhesion to concrete and steel
High chemical resistance against acids, bases and detergents
Resistance to water and humidity
Fast setting and complete hardening in a short period of time
Easy to mix and run
Non-shrinking and shrinking after drying
Environmentally friendly and without harmful substances
Before glue, clean and dry the desired surface.
Use protective gloves and goggles when working with glue.
Keep the glue in a cool and dry place.
Glue from frosting.
Refer to the manufacturer’s instructions for more information on the use of adhesives.
The mentioned technical specifications may be different depending on the brand and type of three-component belt planting adhesive.
Before buying glue, be sure to read its technical specifications carefully.
Use the three-part bead planting adhesive only for the purposes listed in the manufacturer’s instructions.
If you are not familiar with the use of glue, seek help from an expert.
All in all, Belt Planting Adhesive is a strong, efficient and versatile solution for anchoring bolts and threaded rods in many materials. By choosing the right adhesive and following the manufacturer’s instructions exactly, you can be sure of reliable joints that can stand the test of time.
